This problem has occurred when your Sharp printer is require maintenance, and this Sharp printer will be send a signal or signal to a other nearby network that the printer is offline. While your multifunction printer is require a little attention, Then you will get quick change in port settings will get you back up and running in meantime.
We provides a guide on how this printer is offline and how can deal with it.
It will done from the PC or computer where your printer to be install. If your printer will call, example: Sharp MX-411NN on “SERVER”, then only your printer will also be installing on a computer call “SERVER” and that computer that you want to up-front for the steps below.
Open your Control Panel. Windows 8 & Windows 10
1. Open Printers and Fax or Print and other hardware. 2. Please press, "Right" click on the Sharp printer, and then click "Printer Properties". 3. Now click the Ports tab at the top of the windows (if you do not have a ports tab you are open the wrong “Properties”). 4 .Then please, click "Configure Port" (If you can't configure the port this printer is being share from servers and you do need to make these adjustments from the server). 5 .Now uncheck the box at the bottom that it says SNMP Status Enabled.
Look on the printer to warm up? This may print all the document files that you simply have tried to print since offline. If you would like to cancel this, please attend the machine and touch Job Status to prevent and Delete the work.
When you do that, the printer must be “Ready” instead of Offline. If not happened, then check the network connectivity connection to the Sharp printer. confirm you’ve got flashing green light through the Network Interface Card (NIC), and if necessary print a NIC page to form sure it is not on DHCP which the IP has changed to something aside from what’s listed on your port tab.